ACME Staple Company   Products Banner

Company Information

Products


Staple Guns for Wire and Cable

 

Wire & Cable Tackers and Staples

Staple Guns for Wire & Cable
Fully redesigned with the Pro in mind!

Models for Low-voltage and NM-B

Ergonomic Safety Handle

Only Acme staple guns feature high-visibility safety yellow "Sure-Grip" handles and integral hand-stop for maximum year-round comfort and safety.

Lifetime Warranty

If it says Acme on it, we’ll stand behind it. We’re so sure you’ll be satisfied with our new and improved staple guns that each one comes with a limited lifetime warranty.

Jamless Design

Our unique loading system makes Acme staple guns faster, safer, and more reliable than ever before.

Bottom-load Magazine
for Drop-in Loading!

Low Cost, Fast, Safe & Crushfree Fastening of DSL and Coax Broadband Wires!

Acme’s new patented stapling system

  • Meets Broadband manufacturers’
    installation specifications.
  • Used by the nation’s leading structural wiring
    installation training organizations.
  • Preferred by major Telcos and Contractors.

New patented design

  • Won’t crush the wire & cable
  • Preserves Broadband’s
    high speed capacity
  • Faster installation
  • Much lower cost
MODEL LEG LENGTH FINISH MAX. WIRE/CABLE DIA.
18A 3/8", 7/16" (9, 11 mm) Galvanized steel with or without painted crown or corrosion-resistant Monel® or stainless steel with or without painted crown 3/16" (5 mm)
25A 9/32", 3/8", 7/16", 9/16" (7, 9, 11, 14 mm) 1/4" (6 mm)
25AC 19/32" (15 mm) 15/64" (5.95 mm)
37A 3/8", 1/2", 9/16" (9, 13, 14 mm) 3/8" (9 mm)
37AC 19/32" (15 mm) 19/64" (7.5 mm)
75A 9/16", 5/8", 7/8" (14, 16, 22 mm) 1/2" (13 mm)
75A 5/8" NM, 7/8" NM
For NM Building Wire, UL Listed
1/2" (13 mm)
Monel® is a registered trademark of INCO, Co.

Cable Types & Staples Guide

ALWAYS verify all wire/cable diameters PRIOR to stapling due to manufacturers varying wire specifications.

MODEL18A for Max. Wire & Cable Dia. 3/16” (5mm)
Available Leg Lengths: 3/8”, 7/16” (9, 11mm)
Bell Wire 20/2 awg
CAT 3 Wire 2-4 pair
Fire alarm cable 18/2 awg
Security system cable 22/2 awg
Stranded wire up to 12 awg
Telephone station wire 2-4 pair
Thermostat wire 18/ 2 awg
MODEL 25A for Max. Wire & Cable Dia. 1/4” (6mm)
Available Leg Lengths: 9/32”, 3/8”, 7/16”, 9/16” (7,9,11,14 mm)
Bell Wire 18/3 awg
CAT 3 Wire 3-12 pair
Fire alarm cable 18/2 and 18/4 awg
Security system cable 18/2 awg
Stranded wire 8 and 10 awg
Telephone station wire 6 pair
Thermostat wire 18/3 through 18/8 awg
MODEL 25AC* for Max. Wire & Cable Dia. 1/4” (6mm)
Available Leg Length: 19/32” (15mm)
Broadband Cat 5 and up
Broadband Coaxial Cable RC6/59
MODEL 37A for Max. Wire & Cable Dia. 3/8” (9mm)
Available Leg Lengths: 3/8”, 1/2”, 9/16” (9,13,14mm)
CAT 3 Wire 12-32 pair
Coaxial Cable RG59/62
Thermostat Wire 18/7 (Flat)
MODEL 37AC* for Max. Wire & Cable Dia. 11/32” (9mm)
Available Leg Length: 19/32” (15mm)
Broadband Coaxial Cable RG6QUAD/59 and others
MODEL 75A for Max. Wire & Cable Dia. 1/2” (13mm)
Available Leg Lengths: 9/16”, 3/8”, 7/8” (14,16, 22mm)
For NM Building Wire: 5/8” NM, 7/8” NM
NM Building Wire
- Use UL Listed staples -
14/2, 14/3, 12/2, 12/3, 10/3, Twin 14/2 & 12/2, & 14/2 with 14/3
Coaxial Cable Twin RG59/62
Siamese Cable Various
Bundles of smaller wires
Various

* Protected by US Patent 6,848,607. Other patents pending.
Models 25AC and 37AC are designed to drive the specially configured stapels to a predetermined depth in most substrates, thus making it virtually impossible for the Broadband wires to be crushed.
USE SPECIAL 25AC & 37AC STAPELS ONLY.
All staple types available in Galvanized Steel or Corrosion Resistant Monel® or Stainless Steel with or without Painted Crown. Monel® is a registered trademark of INCO, Co.

Incredible Savings Using the Acme 75A Stapling System
for NM-B Wires

Model 75A stapler & UL listed staples comply with NEC 2005 code 334.30 that reads in part "nonmetallic-sheathed cable shall be secured by staples designed and installed so as not to damage the cable."

UL Listed

Peace of mind knowing you’re using UL Listed products for NM 14/2, 14/3, 12/2, 12/3, 10/3, Twin 14/2 and Twin 12/2

Low Price

As much as 40% below the competition

Fewer Staples Required

Unique “Single staple installation” for NM 14/2 and 12/2 uses 50% fewer staples

Shorter Installs

Reduce staple installation time by more than 300%

Insulated vs.
Non-insulated Staples

Many local codes permit use of UL Listed non-insulated staples driven by staple guns as an alternative to hammer-in insulated staples, because of the gun’s controlled staple driving depth. NO DAMAGE TO THE WIRE!

For further information or to place an order,
please Contact Us or fill out our Application Questionnaire.


 

 


ACME Staple Company   87 Hill Road
Franklin, New Hampshire 03235 USA
603-934-2320 • 800-258-3778 • FAX 603-934-6199